Magnetic Knife Holder for Wall and Fridge - 16"

WALL-MOUNT STORAGE THAT ACTUALLY HOLDS
$17.99
$17.99 $25.99
High-carbon German steel
Full tang with ergonomic handles
Ultra Sharp
FREE & FAST SHIPPING
Magnetic knife storage solves three problems at once: counter space (knives off the work surface), edge protection (no banging against other utensils in a drawer), and accessibility (every knife visible at a glance). Execution matters though. Most budget magnetic strips use ferrite or low-grade neodymium magnets rated to 5-10 pounds total — fine for a chef knife and a paring knife but unable to hold heavy butcher cleavers or 12-inch brisket slicers without the blades creeping down the strip over hours of storage. This 16-inch holder uses stronger neodymium magnets rated to a full 15-pound capacity — enough to hold a complete multi-knife kit (including heavy butcher tools) without slip. The 16-inch length is sized for a 7+ knife setup with proper spacing; the 10" version handles 4-5 knives. Mounting is straightforward — included hardware for wall mounting (drywall anchors or screw-into-stud), or the strip mounts directly on any ferromagnetic surface (refrigerator side, metal pantry door, range hood). 304 stainless steel won't rust or stain over time, even in humid kitchen environments. Natural pairing with any Cutluxe multi-knife set — a 5-Piece, 7-Piece, or 15-Piece kit all live well on this strip. For smaller kits (3 knives or fewer), the 10″ holder is the right size at $14.99. For premium kitchens wanting decorative aesthetic alongside function, the Double-Sided Acacia Wood Holder is the upgrade ($29.99). Lifetime warranty on the magnet strip.
All Cutluxe knives are forged from high-carbon German steel — rust-resistant, impact-tough, and precision-tapered to a razor-sharp 14–16° edge. Handles are crafted from ergonomic Pakkawood for a secure, comfortable grip in any condition. Every knife features full tang construction for maximum balance and control. To keep your knife performing at its best: Hand-wash only — dishwashers damage the edge and handle over time Dry immediately after washing to prevent moisture build-up Hone regularly with a honing rod to keep the edge aligned between sharpenings Store on a magnetic strip, in a knife roll, or in a block — never loose in a drawer Use a wooden or plastic cutting board; glass and ceramic surfaces dull the blade
Not the right fit? No problem. If your Cutluxe knife doesn't meet your expectations for any reason, contact us within 30 days of purchase for a full refund or free exchange — no questions asked. We stand behind every blade we make. If the quality isn't what you expected, we'll make it right. Simply reach out to our team at support@cutluxe.com and we'll handle the rest.
Every Cutluxe knife is backed by a lifetime warranty against defects in materials and workmanship. If your blade or handle ever fails due to a manufacturing issue, we'll replace it — for the life of the product. What's covered: Defects in blade construction, handle materials, and assembly. This warranty applies to the original purchaser and is non-transferable. What's not covered: Normal wear and tear, damage from misuse, improper care, or dishwasher use. To make a warranty claim, contact us at support@cutluxe.com with your proof of purchase and a description of the issue.
Shipping Standard delivery (free): All US orders ship free. Arrives in 3–5 business days after dispatch; allow up to 7 days during peak periods. Expedited delivery (from $6.99): 1–2 business days. Most orders ship within 24 hours of purchase. International shipping: Available at checkout. Rates and delivery times calculated at checkout based on destination. Returns Changed your mind? Returns are accepted within 30 days of delivery. Items must be unused and in original packaging. Contact support@cutluxe.com to initiate a return — we'll guide you through the process.
Magnetic Knife Holder for Wall and Fridge - 16"

Magnetic Knife Holder for Wall and Fridge - 16"

Regular price $17.99
Sale price $17.99 Regular price $25.99
Unit price
Logo
Logo
Logo
Logo
Logo
Logo
Logo
Logo
Logo
Logo

CHEF-TRIED PITMASTER-APPROVED

High-Carbon German Steel

Edge retention and corrosion resistance

Full-Tang Construction

Blade through handle for strength and balance

Hand-Sharpened Edges

Razor-sharp out of the box

Ergonomic 
Pakkawood Handles

Comfortable, moisture-resistant, 
built for long use

Magnetic Knife Holder for Wall and Fridge - 16"

HEAVY-HOLD 16″ MAGNETIC KNIFE HOLDER

A 16-inch wall-mount strip with strong neodymium magnets — holds up to 15 pounds of chef knives, cleavers, and utensils without the weak-magnet "knife slips slowly down the strip" problem common to budget holders. 304 stainless steel, mounts on walls or refrigerators. The storage solution for kitchens with a multi-knife setup.

16" Magnetic Knife Holder for Wall and Fridge

Most magnetic knife strips on the market hold around 5–10 pounds total — enough for a chef knife and a paring knife, not enough for a full kit. This 16-inch holder uses stronger neodymium magnets rated to 15 pounds — enough to hold a full multi-knife kit, including heavy butcher cleavers and brisket slicers, without the slow-slip problem cheaper strips develop.
  • 16-inch length — fits a 7+ knife kit comfortably with spacing between blades
  • Neodymium magnets rated to 15 lb capacity — holds heavy cleavers and long slicers securely
  • 304 stainless steel construction — won't rust, easy to wipe clean
  • Mounts on walls (with included hardware) or directly to refrigerator/metal surfaces

WHAT OUR MASTER CHEFS SAY

High-Carbon German Steel

“Reminds me of my father’s knives — only sharper. You feel the difference the moment it hits the board. Solid in the hand.”
Chef Alex R., BBQ Specialist

Edge Retention

“Even after weeks of heavy use, the edge stays razor-sharp. I can slice brisket, roast, and vegetables without stopping to resharpen.”
Chef David T., Professional Butcher

Precision & Craftsmanship

“I’ve worked in Japanese kitchens for over 10 years, and Cutluxe knives feel incredible. The balance, edge, and weight are perfect — slicing fish, meat, and vegetables is effortless."
Chef Haruto S., Tokyo
CutLuxe knives
High-carbon German steel
Full tang, forged
Pakkawood handle
Hand-sharpened edge
Honest Price
Typical knives
Lower-grade stainless
Stamped or partial tang
Plastic or synthetic
Machine-ground
overpriced
CutLuxe knives
High-carbon German steel
Full tang, forged
Pakkawood handle
Hand-sharpened edge
Honest Price
Typical knives
Lower-grade stainless
Stamped or partial tang
Plastic or synthetic
Machine-ground
overpriced
Join the 11,700+ CutLuxe Community

Frequently Asked Questions

Frequently Asked Questions

Depends on how many knives you're storing. The 16-inch holder fits a 7+ knife kit comfortably with proper spacing between blades so they don't clash when you reach for one. Right size for buyers with full kitchen sets — the 5-Piece, 7-Piece, 8-Piece Block, or 15-Piece Block lineups all live well on 16 inches of strip. The 10-inch holder ($14.99) handles 4-5 knives. Right for smaller kits or for cooks supplementing a knife block with a wall strip for their everyday-use knives only. For most kitchens with a multi-knife setup, 16 inches is the more flexible choice — you can grow into the extra capacity if you add knives later. For tight wall space or strictly minimal kits, the 10-inch is the right call. Both use the same neodymium magnets and 304 stainless steel construction.
Yes — that's the differentiator. The 15-pound total capacity is well over the combined weight of a typical knife collection. A 7-piece Cutluxe set weighs about 4-5 pounds. Even loading the strip with the heaviest blades in the lineup (7″ Cleaver, 10″ Cimeter, 12″ Brisket Slicer, 10″ Bullnose) totals around 4-5 pounds — well within the 15-lb limit. The 15-lb capacity isn't a per-knife rating; it's the strip's total load before the magnetic field can't hold reliably. For practical purposes, you won't hit that limit with standard kitchen knives. The cleaver and brisket slicer tests are where cheap magnetic strips fail — the heavier blades slip slowly downward under their own weight until they fall off. The stronger neodymium magnets in this holder grip with enough force that even the heaviest blades stay put indefinitely. Practical test: hang the heaviest blade you own on the strip, leave it overnight, check it in the morning. If it's still where you put it, the strip is doing its job.
Two installation paths depending on your kitchen setup. Wall mount uses the included hardware — drywall anchors for hollow wall sections, or screws directly into a stud where available. Stud-mounting is preferred for the longest-term hold; drywall anchors work fine for the weight involved (15 lbs distributed across two mounting points) but require care if you ever rearrange. Refrigerator/metal-surface mount uses the strip's own magnetic backing — the strip itself contains magnets that grip directly to ferromagnetic surfaces (refrigerator side panel, metal pantry door, stainless steel range hood, washer/dryer top). No drilling, no installation, just lift-and-stick. Useful for rental kitchens (no holes in walls), apartment cooks who can't drill, or anyone who wants the option to relocate the strip later. The magnetic-backing mount holds firmly against vertical metal surfaces but isn't load-rated as high as a wall-mount install — for a fully loaded strip, wall mount is more secure long-term.
Three options depending on your wall situation. Easiest: refrigerator side or metal pantry door — strip back is magnetic, just stick it on, no tools needed. Takes 30 seconds. Second easiest: drywall mount with included anchors — mark two mounting points using the holes in the strip end-caps, drill pilot holes with a regular drill bit, tap in the included drywall anchors, secure the strip with the included screws. Takes about 10 minutes total. Best long-term: stud mount — find a stud with a stud finder (or knock-test the wall), drill pilot holes directly into the stud, screw the strip in place. Takes 15 minutes and provides the most secure mount for heavy loaded strips. Hardware for all three options is included. For renters or anyone uncomfortable drilling, the magnetic-backing option (refrigerator/metal surface) is the no-tools approach.
Lifetime warranty against manufacturing defects on the magnet strip itself — magnet failure, body separation, surface flaws. Mounting hardware (drywall anchors, screws) isn't covered separately but can be sourced at any hardware store if lost or damaged. Beyond the warranty, 30-day money-back guarantee covers everything else — wrong fit, change of mind, doesn't work in your kitchen setup. Full refund or exchange, no restock fees. As a gift: works well as a supplementary gift for a recipient who recently bought (or received) a multi-knife set and hasn't yet solved their storage problem. Pairs naturally with any Cutluxe knife set as a thoughtful storage upgrade — at $17.99, sized appropriately for a tertiary gift in a multi-giver bundle. Less right as a standalone gift (a knife storage solution isn't useful without knives to store). For premium gift contexts, the Double-Sided Acacia Wood Holder ($29.99) is the more decorative alternative.

YOU MAY ALSO LIKE

10″ Butcher Cimeter Knife
★★★★★ 164 Reviews
10″ Butcher Cimeter Knife
$44.99 $64.99
SAVE 30%
12″ Slicing Carving Brisket Knife
★★★★★ 768 Reviews
12″ Slicing Carving Brisket Knife
$44.99 $64.99
SAVE 30%
4 Straight Edge Steak Knives
★★★★★ 60 Reviews
4 Straight Edge Steak Knives
$51.99 $74.99
SAVE 30%
Pro Kitchen Block – 15-Piece
★★★★★ 117 Reviews
Pro Kitchen Block – 15-Piece
$149.99 $214.99
SAVE 30%
Ultimate BBQ & Carving Set 5 Piece
★★★★★ 9 Reviews
Ultimate BBQ & Carving Set 5 Piece
$129.99 $185.99
SAVE 30%
8″ Chef Knife
★★★★★ 57 Reviews
8″ Chef Knife
$39.97 $51.99
SAVE 23%
Magnetic Knife Holder for Wall or Fridge — More Space, Less Clutter
Stainless Steel Magnetic Knife Holder — Durability and Clean Presentation

A full set of blades deserves a better home than a crowded drawer or a bulky block. This 16 inch magnetic knife holder clears your counter and puts every knife where it belongs—visible, dry, and ready.

Mounted on the wall or along the side of the fridge, it keeps your entire knife lineup within reach. No slots dulling edges. No stacking blades on top of each other. Just clean storage that works the way a real kitchen should.

For cooks with limited counter space, this is the upgrade that makes sense. One long stainless steel strip on the refrigerator, solid hold, and room for the knives you actually use.

Magnetic Knife Holder for Wall or Fridge — Full Knife Collection Storage in One Strip

A 16 inch magnetic knife strip gives you space to spread out. Chef blades, slicers, cleavers—each knife has room without crowding. The strength comes from a continuous magnet system running across the entire strip, so every section holds firm.

The stainless steel body keeps things durable and clean-looking, while included hardware makes it easy to mount flush against the wall. No gaps. No wobble. Just a steady line of tools ready for work.

This is how you store a serious knife collection without clutter.

Magnetic Knife Holder for Fridge — Flexible Placement Without Drilling

Not every kitchen allows drilling. That’s where the fridge setup comes in. This magnetic holder can attach directly to the refrigerator, giving you a secure place for each knife without touching the wall.

The magnet holds firm against the refrigerator surface, keeping your blades stable and easy to reach. For renters or compact kitchens, this refrigerator option makes all the difference—clean storage without permanent changes.

Same magnet strength. Different placement. Built for real-life setups.

A working kitchen sees moisture, heat, and constant use. That’s why stainless steel racks matter. It resists corrosion, wipes clean, and keeps its look over time.

This stainless steel 16 inch magnetic knife holder is built to handle daily contact with water, oils, and food prep. The surface stays smooth, the steel stays strong, and the magnetic hold remains consistent.

It’s not just storage—it’s a clean, reliable presentation of your tools.

16 Inch Magnetic Knife Holder — Choose the Cutluxe Solution

A 16 inch magnetic knife strip gives you the space to organize your full lineup—chef blades, utility pieces, and specialty knives—side by side without overlap.

Whether you mount it on the wall or place it on the fridge, this Cutluxe holder delivers consistent hold, durable stainless steel, and practical design. Every knife sits secure, every edge stays protected.

If you want flexible, dependable storage for your knife collection, this is the one. Clean lines. Strong magnet. Built to earn its place in your kitchen.

SIGN UP & SAVE 15% OFF

Join to receive the latest product updates & promotions, and receive 15% OFF your first order
We respect your privacy. Unsubscribe anytime